Skip to content

How To Clone Xbox Hard Drive?

Over time, consoles have developed, and the equipment used has been adapted to the current requirements of gaming. Consider, for instance, the SNES and the SEGA MegaDrive; the hardware was relatively simple compared to the modern machines. Also, they didn’t include hard drives!

As time has passed, hard drives have been introduced to consoles, and they have grown in size! The first Xbox only had a hard drive of 10GB installed. This size appears to be insignificant to today’s needs. However, compare this to an Xbox One hard drive of 500GB, and suddenly, it’s much smaller.

Do I have the ability to copy the HDD of my Xbox 360 HDD?

Yes, you can copy the contents of your Xbox 360 HDD. For this, you’ll require the cloning software and an external HDD large enough to accommodate all the data on the Xbox 360 HDD. Connect the cloning tool for the Xbox 360 and the external HDD and follow the instructions on the screen to create a clone of your HDD.

How can I create a replica from my drive?

There are several methods to create a replica from your drive. One option is employing a cloning program such as Carbon Copy Cloner or SuperDuper. Another method could be creating an image on your drive using a program such as Disk Utility or Clonezilla.

Cloning the SSD

The goal was to make an identical replica of the drive to the destination drive, so the user decided to use Sabrent’s clone drive, The EC-SSD2, which is available to buy at Amazon at EUR 109.99. With this tool, we can create two SSDs quickly since there is no need for a computer, and all it takes is pressing a button.

After around twenty minutes of cloning, the device was fully functional, and all left was to mount it onto the console to verify the flawless operation. When all was said and done, the console was booted on the newly created drive immediately, and all the files were in good condition.

How can I transfer my information from an Xbox drive to another?

You’ll require USB flash drives and an operating system to transfer data from an Xbox drive to another. First, prepare your USB flash drive with NTFS. Then copy the contents of the original Xbox hard drive onto the USB flash drive. After that, insert your USB flash drive into the new Xbox hard drive. Format it to XBOX360.

Internal Hard Drives for Xbox 360 E and Xbox 360 S

Xbox 360 S hard drive and Xbox 360 E hard drive can be swapped out and replaced. Therefore, upgrading your Xbox 360 internal hard drive is possible directly. In general, it is the case that the Xbox 360 Slim hard drive and the Xbox 360 E hard drive share the same design. It’s like the following image:

Up to now, 500 GB is the maximum capacity of the Xbox 360 E and Xbox 360 S internal hard drives. In addition, it is possible to install game discs directly onto the hard drive to experience speedier game loading.

The drive you purchase is an authorized item from Microsoft; therefore, you should have no issues. The best option is to buy the 500GB hard drive for the Xbox 360 E and Xbox 360 S on Amazon.

Before you turn up your Xbox One


There’s one more action you have to take before you turn to the Xbox. Reboot your computer and transfer all Xbox One Operating System files onto a USB stick and connect the USB stick to your Xbox.

The power as well as the HDMI cables to the Xbox Then, hold both the Bind and Eject buttons located on both sides of your Xbox. While holding both the Bind and the Eject button, hold down the power button, and continue pressing the Bind and Eject buttons.

The sound will be heard while the display will display in safe mode. Keep pressing the Eject and Bind buttons, and you will hear two additional beeps.

Leave a Reply

Your email address will not be published. Required fields are marked *